Adaptor Vertical Mounts (Steel)

adapt_vert

Product Features

BSF Vertical Mount Adaptors are available in two basic styles: (Style A) below tank top and (Style D) above tank.  The vertical mount adaptors are becoming increasingly popular with power unit builders because of the one piece construction.  These adaptors are designed to accomodate IEC (Metric), D-Flange or NEMA C face motors to virtually any other component (pump, hydraulic motor, gearbox, actuator, etc.). 

Other features include:

  • Sturdy welded STEEL construction
  • Specifically designed to accommodate any component combination
  • Large coupling access hole
  • Precision machined
  • Made to accommodate any face-to-face length

Styles

  • Style A Design - Adaptor is inside the reservoir

  • Style D Design - Adaptor sits above the reservoir and permits easy access to coupling.  It also allows motor removal without disturbing pump installation.  This style is available with optional S.A.B. (Sound Absorbing Barrier) Material installed inside the adaptor.

  • VMR (Vertical Motor Removal) Design - This unique style places the adaptor inside the reservoir but still allows for motor, coupling hub and coupling insert to be removed, inspected or replaced without disturbing the adaptor or pump.  C-face motor applications require an additional adaptor plate between the adaptor and the motor.

  • VDK (Vertical Dampening Kit) Design - This style places the adaptor inside the reservoir and incorporates a dampening gasket and bushings to reduce the vibration and sound being transmitted. 

  • PVQ (Pump-end Vertical Quiet) Design - This style sits the adaptor above the reservoir and incorporates a dampening gasket and bushings to reduce the vibration and sound being transmitted.  This design allows for motor, coupling hub and coupling insert to be removed, inspected or replaced without disturbing the adaptor or pump.  This style is available with optional S.A.B. (Sound Absorbing Barrier) Material installed inside the adaptor.

  • BF (Backface Only) Design - This design places the adaptor inside the reservoir.  The motor end flange is machined to lay flat on the reservoir lid and only one set of mounting holes is used to attached the motor, the tank top and the housing.

Options

  • Customized flanges
  • Available with paint options (Standard Red ~ or ~ Grey, Yellow, Black or Gloss Black)
  • 304 or 316 Stainless Steel Material
  • Nickel-plated
  • Powder-coated
  • Oil-tight
  • Custom size access hole(s)
  • Marine weld
  • Drain hole(s)

More Info

Standard Material:  ASTM A54 Grade B ERW pipe and ASTM Grade A36 steel plate for end flanges.

Technical Data Sheets:

The PVQ and VDK kits include the Vibration Dampening Gasket, Bushings and hardware to mount.

 

Disclaimer:  Please be aware that BSF Standard Style A vertical design may not work with all motors.  Customers are responsible for verifying that their specific motor face O.D. & thickness, and the motor body size & shape, will not cause interference with BSF adaptor's outer bolt circle used for mounting to the tank top.  Nema does not publish these dimensions specifically and we have found that in some rare cases the motor face O.D. and/or body shape can interfere with our standard bolt circle design.  Designs for larger motors and custom sizes are available.

Related Products

shaft_coup_mag

SHAFT COUPLING

MAGNALOY

shaft_coup_rotex

SHAFT COUPLING

ROTEX

shaft_coup_bowex

SHAFT COUPLING

BOWEX